Hot Tub PH Increaser

Hot Tub PH Increaser -750 G - Professional Grade!

Hot Tub pH Increaser raises the pH levels in your hot tub water to eliminate eye and skin irritation and prevent damage to your hot tub equipment. Hot Tub water which is low in pH is acidic and therefore classified as aggressive which will cause the hot tub water to attack equipment prematurely. Hot Tub pH increaser is a dry powder that is completely soluble and fast acting. Raises pH in the water, prevents damage to your Hot Tub and increases sanitizier efficiency.

• Hot Tub pH Booster is a comparable product to Spa Guard Balance Pak 200, Beachcomber Care Free pH Free, Arctic Pure Adjust Up, Dazzle pH Plus, Spa Boss pH Booster, SpaLife pH Plus, and Spa Essentials pH Increaser

Directions: One Capful holds approximately 30 grams

• Test hot tub water for a pH reading. When test readings indicate a pH below 7.2, then add Hot Tub Ph Increaser. If pH level is below 6.6 then add 15 grams per 1,000 litres. If pH level is 6.6 - 7.0 then add in 10 grams per 1,000 litres. If pH tests between 7 - 7.2 then add in 7 grams per 1,000 litres
• It maybe broadcasted on the hot tub surface with jets running and leave hot tub cover off spa for 15 minutes before closing the cover.
• Re test after and hour and re adjust if required. Hot Tub maybe used immediately following treatment.

Proper pH Balance is a essential part of hot tub maintenance. The recommended range is 7.2 - 7.6. If the pH of your hot tub is low  below 7.2), the water will be acidic. Discomfort from skin and eye irritation could develop. This condition also cause chlorine and bromine to become unstable, and therefore less effective in killing bacteria, algae and in disintegrating organic matter.

Northern Hot Tub Covers Approved for use with your new hot tub cover when used in accordance with product instructions.